Armasight NKBDASTRI511I11 Dark Strider GEN 1+ Night vision binoculars - Manual (Page 4)

4
STANDARD COMPONENTS DESCRIPTION
1) Armasight Dark Strider Binoculars
Night vision binoculars with 5x magnification.
2) Objective Lens Caps
The objective lens caps are designed to protect the objective lens from physical damage, as well as
allow the testing of the device’s operation in daylight.
3) Eye Cups
The rubber eye cups are designed to protect the eyepieces and to provide comfort of use for the use.
4) CR123A Lithium Battery
3V CR123A lithium batteries are used to supply power to the unit.
5) Neck Strap
The neck strap allows the Dark Strider Binoculars to hang comfortably around your neck during periods
of non-observation.
6) User Manual
The user manual contains a full description of the device and accessories, information about controls,
installation, maintenance and troubleshooting procedures.
7) Carrying Case
The carrying case is used to store and carry the Dark Strider binocular and accessories.
OPTIONAL EqUIPMENT
1) IR810 Detachable Long Range Infrared Illuminator (Part# IAIR810IR000002)
Extra long-range infrared illuminator. Provides greater viewing capabilities when the environment has
little or no ambient light.
2) IRDS Adapter (Part# ANAM000063)
Allows user to mount Long Range IR Illuminator onto Dark Strider..
2. PREPARATIONS FOR OPERATION
WARNING :
the dark strider night vision binoculars are designed for several years of reliable service. to
ensure trouble-free performance, please observe the following instructions::
• Do not activate the device in daylight unless the protective lens cover is fitted securely over
the lens. If the device is ON, do not direct the device at bright light sources, such as car head-
lights, camp fires, street lights, etc., as this will cause damage to the device.
• Do not check the device operation in daylight unless the front lens cap is fitted securely over
the lens, and even then, the device should only be ON for the few seconds it takes to establish
correct operation.
• Do not open the body of the device or otherwise disassemble it.
• Avoid dropping or otherwise impacting the device.
• Do not expose the device to moisture or extreme temperatures.
• Do not touch the lenses. Clean optical parts with a clean, soft cloth, and only use professional
lens cleaners designed for use with optics.
• Do not forget to remove the battery from the battery compartment if the device is to be
stored for more than 3 days.
• Do not forget to turn the device OFF during periods of non-operation.