Asus PR-DLS - Manual (Page 47)

ASUS PR-DLS motherboard user guide 2-21
PR-DLS
PR-DLS 12-Volt Cooling Fan Power
GND Rotation +12V
SYSFAN3
SYSFAN1
GND
Rotation
+12V
CPUFAN2
GND
Rotation
+12V
CPUFAN1 SYSFAN2
GND Rotation +12V GND Rotation +12V
7. CPU, Chassis, and Power Fan Connectors
(3-pin CPUFAN1, CPUFAN2, SYSFAN1, SYSFAN2, SYSFAN3)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
PR-DLS
PR-DLS USB Header
USB2
USB Power
USBP2–
USBP2+
GND
NC USB Power
USBP3–
USBP3+
GND
1
5
6
10
8. USB header (10-1 pin USB2)
If the USB ports on the rear panel are inadequate, a USB header is
available for additional USB ports. The USB header complies with USB
1.1 specification that supports up to 12 Mbps connection speed.