Asus PR-DLS - Manual (Page 119)

ASUS PR-DLS motherboard user guide 5-27
7. If the driver is the one that you want to install, type Y for yes or press
Enter. If the driver is not the one you want to install, type N for no. If
you specify yes, the install.sh script installs the driver you indicated
as well as bootmod and bootbin patches.
8. When the installation has completed, and the install.sh script exits,
un-mount the diskette by typing at the command prompt:
# cd /
# umount /mnt
9. Remove the Solaris Driver ITU diskette from the diskette drive.
10. Reboot your machine by typing at the command prompt:
# touch /reconfigure
# reboot
11. If you have not already done so, turn off your system, add the new
hardware, and turn on your system again.
12. At the << Current Boot Parameters >> prompt, type:
b -r
to force reconfiguration of the machine. When the Solaris operating
environment is finished booting and running, the new devices whose
drivers you installed are available for use.
5.5.2 Intel ® 82551QM/82544GC LAN Driver
Installation
Solaris7 system can correctly recognize Intel 82551QM/82544GC
controller by itself at installation step. You didn’t need to load the network
driver for the onboard LAN device.
5.5.3 ATI ® Rage XL Display Driver Installation
Solaris 7 cannot support ATI Rage XL graphic default, you can configure
the graphic as a “Standard VGA” device for supporting Solaris X Window.