Asus PR-DLS - Manual (Page 125)

ASUS PR-DLS motherboard user guide 5-33
For DOS System Users:
Under this section, you have two choices.
1. Use a utility that will copy the raw dd image onto a 1.44MB floppy
disk. For UnixWare 2.1.X, this dd image is located at:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD
For UnixWare 7, this dd image is located at:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW7 \UNIXWARE.DD
RAWRITE3.COM, which is a public domain utility, is available on this
CD-ROM at this location:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.COM
Instructions for using this utility are included in its accompanying
RaWrite file or as a Microsoft Word document located at:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.DOC
2. The other DOS alternative is to use the self-extracting image file
appropriate for your version of UnixWare. These are located under:
\Drivers\Sdms\Diskimag\Uw7.exe or (Uw21x.exe)
B. New System Installation
1. Boot the computer using the installation diskettes or Bootable OS CD
Disc that you received with the UnixWare operating system
distribution package. For example, UnixWare 7 has two diskettes.
2. Follow the instructions on the screen.
3. Insert the “ PCI SCSI SCO UnixWare driver ” diskette when prompted to
insert the host adapter diskette. To install other host adapter drivers,
insert the host adapter diskette provided with the UnixWare
distribution package and press Enter. If there are no other host
adapter drivers to install, follow the instructions to continue the
installation.
4. The system loads the required drivers, such as C8XX , and indicates
when they are loaded.
5. At the end of the installation, you will see a prompt to reinsert the
HBA driver disk. Insert the “
PCI SCSI SCO UnixWare driver ” diskette
and press Enter. The kernel is built and the installation will terminate.
6. Remove the driver disk when prompted and reboot the system.