Asus P/I-P6NP5 - Manual (Page 46)

P/I-P6NP5 User's Manual 40
(Chipset Features)
IV
. BIOS
IV. BIOS SOFTWARE
IV
. BIOS
(Power Management)
Power Management Setup
This “Power Management Setup” option allows you to reduce power consumption.
This feature turns off the video display and shuts down the hard disk after a period
of inactivity.
NOTE: SETUP Defaults are noted in parenthesis next to each function heading.
Details of Power Management Setup
Power Management (User Defined)
This field acts as the master control for the power management modes. Max Saving
puts the system into power saving mode after a brief period of system inactivity;
Min Saving is almost the same as Max Saving except that this time the system inac-
tivity period is longer; Disabled disables the power saving features; User Defined
allows you to set power saving options according to your preference.
IMPORTANT: Advanced Power Management (APM) should be installed to
keep the system time updated when the computer enters suspend mode acti-
vated by the BIOS Power Management. For DOS environments, you need to
add DEVICE=C:\DOS\POWER.EXE in you CONFIG.SYS. For Windows 3.x
and Windows 95, you need to install Windows with the APM feature. A battery
and power cord icon labeled "Power" will appear in the "Control Panel."
Choose "Advanced" in the Power Management Field.
Video Off Option (Susp, Stby->Off )
This field determines when to activate the video off feature for monitor power manage-
ment. The settings are Susp, Stby->Off, Suspend->Off, Always on, and All modes->off.