Asus V7-P5G41E - Manual (Page 62)

4-12 Chapter 4: BIOS setup
PIO.Mode.[Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA.Mode.[Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART.Monitoring.[Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.4 Storage Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
Storage Configuration
ATA/IDE Configuration [Enhanced]
Enahnced Mode Support On [S-ATA]
IDE Detect Time Out (Sec) [35]
ATA/IDE Configuration [Enhanced]
Allows you to configure ATA/IDE. Configuration options: [Disabled] [Compatible]
[Enhanced]
Enhanced Mode Support On [S-ATA]
Allows you to set Serial ATA, Parallel ATA or both as native mode.
Configuration options: [S-ATA+P-ATA] [S-ATA] [P-ATA]
IDE.Detect.Time.Out.[35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
Disabled
Compatible
Enhanced
Options