Asus G1-P7P55E - Manual (Page 57)

5-8 Chapter 5: BIOS setup
5.3 Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving
you an overview of the basic system information.
Refer to section 5.2.1.BIOS.menu.screen for information on the menu screen
items and how to navigate through them.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
System Time [ 00 :31:48]
System Date [Tue 07/28/2009]
Language [English]
SATA 1 :[Not Detected]
SATA 2 :[Not Detected] :[Not Detected]
SATA 3 :[Not Detected]
SATA 4 :[Not Detected]
ESATA :[Not Detected]
Storage Configuration
System Information
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system time.
5.3.1. System.Time.[xx:xx:xx]
Allows you to set the system time.
5.3.2. System.Date.[Day.xx/xx/xxxx]
Allows you to set the system date.
5.3.3. Language.[English]
Allows you to choose the display language in BIOS.
Configuration options: [繁體中文] [简体中文] [日本語] [Français] [Deutsch] [English]
5.3.4. SATA.1-4.and.ESATA
While entering Setup, the BIOS automatically detects the presence of SATA
devices. There is a separate sub-menu for each SATA device. Select a device item
then press to display the SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Device,
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and
SMART Monitoring). These values are not user-configurable. These items show
N/A if no Serial ATA device is installed in the system.