Asus RS160-E2 - Manual (Page 29)

2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3
2.5 Expansion slot
The barebone server comes with a riser card bracket installed on the 64-bit
expansion slot. You need to remove the bracket if you wish to install a
PCI-X expansion card.
2.5.1 2.5.1 2.5.1 2.5.1 2.5.1 Installing expansion cards Installing expansion cards Installing expansion cards Installing expansion cards Installing expansion cards
To install a short expansion card:
1. Use a Phillips (cross) screwdriver
to remove the screw that
secures the riser card to the
chassis.
3. Remove the screw that secures
the slot metal cover.
4. Install PCI-X cards to the
bracket as shown, then secure
the card with a screw.
2. Firmly hold the riser card
bracket, then pull it up to
detach it from the PCI-X slot on
the motherboard.