Asus RS160-E2 - Manual (Page 28)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 1 0 2 - 1 0 2 - 1 0 2 - 1 0 2 - 1 0
5. Carefully insert the drive tray
and push it all the way to the
depth of the bay until just a
small fraction of the tray edge
protrudes.
6. Push the tray lever until it
clicks, and secures the drive
tray in place. The drive tray is
correctly placed when its front
edge aligns with the bay edge.
7. Repeat steps 1 to 6 if you wish
to install a second and/or third
drive.
When installed, the SCSI connector on the drive connects to the SCSI
connector on the backplane. Refer to section “2.7.2 SCSI backplane” for
illustration.