Asus WL-500gP V2 - Manual (Page 36)

WL-500gP V2 Wireless Router User Manual
33
7. Configure WL500gP V2 under Vista OS
The Windows Simple Config function, which is preinstalled in the ASUS WL500gP
V2, enables the device to be configured via WCN Net process of Windows Vista.
Follow the steps below to configure the device using WCN-Net process of Windows
Vista:
Note: The WCN Net process of Windows Vista can only discover the device when the
device is not configured and is in the default settings state. If the device is configured,
you have to set up the device by WEB or EZsetup. Or you can push Reset button and
then begin WCN-NET setup.
1. Connect the device to your PC and power on it.
2. Click Start >Network from the Vista desktop. The Network screen appears (as shown
below).
3. Double click ASUS Wireless Router.
1) Configuring the device