Asus WL-330N - Manual (Page 5)

5
English
4. Set up the devices according to your selected operation mode.
IMPORTANT: Ensure that you unplug and disconnect the wires/cables
from your existing modem setup.
Wireless Router mode
a: Plug the modem's power adapter to a power source.
b: Using a network cable, connect the modem and the wireless router.
Access Point mode
a: Using a network cable, connect the
access point and the wireless router.
Repeater and Hotspot modes
Simply power on the wireless router using its power adapter or its micro USB
power cord. A network cable is not needed.
NOTE: For more details on using the micro USB cord to power the wireless
router, refer to step 2 of the Getting started section.
Wireless Network Adapter mode
a: Connect the micro USB power cord
to the Ethernet-enabled device
such as an Internet TV.
b: Use a network cable to connect the
Ethernet-enabled device and the
wireless router.
Modem
a
b
ANT ANT Reset Power On/Off USB LAN4 LAN3 LAN2 LAN1 WPS On Off ADSL
a
a
b