English, Getting started – Asus WL-330N User Manual

Page 4

English

Getting started

1. Unplug and disconnect the wires/cables from your existing modem setup.

a: Unplug the AC adapter from the power outlet and disconnect it from your

cable/ADSL modem.

b: Disconnect the network cable from your cable/ADSL modem.

NOTE: For Wireless Router mode, start from step 1. For other operation

modes, start from step 2.

2. Connect and turn on your wireless router.

a: Using a network cable, connect your computer to the wireless router’s LAN port.

b: To power the wireless router, use its power adapter or its micro USB power cord.

3. Log into the wireless router's web graphics user interface (web GUI).

a: Ensure that the wireless LED is blinking.

b: In your web browser, key in 192.168.1.1. Key in admin as the default user-

name and password.

c: From the web GUI, select the operation mode and configure its settings for

your wireless network setup.
NOTES:
• For more details. refer to the user manual included in the support CD.

• If the web GUI does not launch, refer to the Troubleshooting section.

Modem

Wireless LED