Asus TS100-E6/PI4 - Manual (Page 73)

ASUS TS100-E6/PI4 4-21
Onboard LAN1/2 Boot ROM [PXE]
Allows you to configure the onboard LAN1/2 boot mode.
Configuration: [Disabled] [PXE]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base address.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [ECP] [EPP] [ECP & EPP]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
The following two items are for the P7F-X/SATA server board only.
Marvell SATA controller [Enabled]
Allows you to enable or disable Marvell SATA controller.
Configuration options: [Enabled] [Disabled]
Marvell SATA BOOTROM [Enabled]
Allows you to enable or disable Marvell SATA BootROM.
Configuration options: [Disabled] [Enabled]