Asus TS100-E6/PI4 - Manual (Page 36)

Chapter 2: Hardware setup 2-18
2.8 System fan
You may need to remove previously installed system fan when it got defective. This
section tells how to remove the system fan.
To remove the system fan:
1. Unplug the system fan cable from
the REAR_FAN1 connector on the
motherboard.
3. Remove the system fan, and then
set it aside.
2. Locate and remove four system fan
screws at the rear panel. Keep the
screws for late use.
Hold the system fan with one
hand while removing the system
fan screws.
Follow the previous instructions
in reverse if you want to reinstall
the system fan.