beautypg.com

Chapter 2 – Asus P7P55D-E Premium User Manual

Page 53

background image

ASUS P7P55D-E Premium

2-33

Chapter 2

3.

Marvell

®

Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [gray])

These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA 6.0 Gb/s

hard disk drives.

• These connectors are set to Standard IDE mode by default. In Standard IDE mode,

you can connect Serial ATA boot/data hard disk drives to these connectors.

• You must install Windows

®

XP Service Pack 2 or later versions before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

®

XP SP2 or later versions.

• When using hot-plug and NCQ, set the Marvell Controller item in the BIOS to [AHCI

Mode]. Refer to section 3.6.3 Onboard Devices Configuration for details.

See also other documents in the category Asus Tablet: