Asus Z8NA-D6 - Manual (Page 146)

6-10 Chapter 6: Driver installation
6. When asked if you will load additional RAID controller drivers, select No, then
press .
5. Insert the Red Hat ® Enterprise RAID driver disk to the floppy disk drive, select
OK, then press .
The drivers for the RAID controller are installed to the system.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press “OK” to continue.
OK Back
7. Follow the onscreen instructions to finish the OS installation.
8. When the installation is completed, DO NOT click
Reboot. Press
+ + to switch to the command-line interface from graphic user
interface.
9. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No