Asus G1-P5G43 - Manual (Page 71)

ASUS G1-P5G43 5-17
5.5.4 APM Configuration
Restore.on.AC.Power.Loss.[Power.Off]
When set to.[Power.Off], the system goes into off state after an AC power loss.
When set to [Power.On], the system goes on after an AC power loss. When set to
[Last.State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On] [Last
State]
Power.On.By.PS/2.Keyboard.[Disabled]
Allows you to use the keyboard to turn on the system. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Enabled]
Resume.On.Ring.[Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume.On.PCI.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.PCIE.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI Express card. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
5.5.5. Hardware.Monitor
CPU.Temperature.[xxxºC/xxxºF].or.[Ignored]
MB.Temperature.[xxxºC/xxxºF].or.[Ignored]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Ignored if you do not wish to display the detected
temperatures.