Asus RS160-S5 - Manual (Page 37)

2-19 ASUS RS160-S5/PX4
4. Install a PCI Express x16 card to
the bracket as shown, then secure
the card with a screw.
2.5.2 Reinstalling the riser card bracket
To reinstall the riser card bracket:
1. Take note of the holes on the riser card bay. The two pegs on the riser card
bracket should match these holes to ensure that the bracket is properly in
place.
Pegs on the
riser card
bracket
2. Align the riser card bracket with the
expansion card to the PCI Express
x16 slot on the motherboard.
3. Press the riser card bracket until
the golden connectors completely
fit the slot and the bracket aligns
with the rear panel.