Asus ASMB3 - Manual (Page 19)

ASUS ASMB3-SOL 2-5
2.3 Firmware update
You need to update the Broadcom ® IPMI and ASMB3-SOL firmware before you
start using the ASMB3-SOL board.
2.3.1 For motherboards with Broadcom ® 5721 LAN
To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press to save your changes and exit the BIOS setup.
5. On reboot, the main menu appears. Type (Broadcom IPMI Firmware
Update).
6. A screen appears, showing the current (if any) firmware version, and the new
firmware version. The screen also displays a confirmation message asking
whether or not you want to update the firmware appears. Press to
update.
MB: KFN4-DRE
a) FreeDOS command prompt
b) Broadcom ASF Firmware Update
c) Broadcom IPMI Firmware Update
d) ASMB3-SOL Firmware Update
Please choose a to d:
started logfile ’C:fwver.log
none
none
Current BroadCom ASF/IPMI firmware revision : none
New BroadCom ASF/IPMI firmware revision : ASFIPMI v6.09
Update the IPMI firmware ?(y/n) _
The firmware updating process starts.
********************************************************************
Copyright(c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme User Diagnostics 8.30 (18/21/05)
********************************************************************
C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration
- ------ --- --- --- ---- --- --- --- --- ------------
0 5721:C1 02:00:0 Ex1 250 CFCF 5 128k 00E018042100 5721-v3.49a W,auto
1 5721:C1 04:00:0 Ex1 250 CFCF 9 128k 00E018042101 5721-v3.55a W,auto
0 5721:C1 02:00:0 Ex1 250 CFCF 5 128k 00E018042100 5721-v3.49a W,auto
Programming... 131072
OK