Asus PIKE 2308 - Manual (Page 11)

ASUS PIKE 2308 1-5
5. Connect the hard disk drives to the SAS
connectors on the motherboard.
4. Secure the heatsink to the nearest
screw hole on the motherboard.
DO NOT overtighten the screw, or
the motherboard component can be
damaged.
To uninstall ASUS PIKE 2308 SAS RAID card from a 2U, 5U, or pedestal server
1. Disconnect all SAS hard disk drives
from the motherboard.
2. Remove the screw that secures the
RAID card to the motherboard.
3. Release the heatsink latch from the
card slot with a finger, and then remove
the RAID card from the slot.