Asus Fonepad Note 6 - Manual (Page 42)

ASUS Fonepad E-Manual
Connecting to the world
Connecting to mobile networks
After installing the SIM card, you are ready to use your ASUS Fonepad to make/
receive calls or transmit/receive data. Different countries or regions may have
different mobile networks available and you may have to configure your ASUS
Fonepad to access these networks.
To configure your mobile networks setting:
1. Do any of the following to go to the Settings screen:
q
Tap to go to the All Apps screen then tap
Settings
.
q
Swipe your finger down from the top of the screen to go to ASUS Quick
Settings then tap .
2. From the Settings screen, tap More... then tap Mobile networks.
NOTE: Refer to section Settings for more details about ASUS Quick Settings.
IMPORTANT! If your ASUS Fonepad does not connect to a network, contact your
mobile network carrier for assistance.
Connecting to Wi-Fi networks
Wi-Fi wireless networking technology allows you to exchange data wirelessly
over a network.To use Wi-Fi, enable the Wi-Fi feature in your ASUS Fonepad and
connect to a wireless network. Some wireless networks are secured with a key or
protected with digital certificates and requires additional steps to set up; others
are open and you can easily connect to them.
NOTE: Turn Wi-Fi off when you are not using it to help save battery power.
To enable Wi-Fi and connect to a Wi-Fi network:
1. Tap to go to the All Apps screen then tap
Settings
.
2. Slide the Wi-Fi switch to ON. When enabled, your ASUS Fonepad scans for
available Wi-Fi networks.