Asus PIKE 1078 - Manual (Page 73)

ASUS PIKE 1078 3-5
4. Insert the RAID driver disk you created earlier to the floppy disk drive, then
press .
Windows Setup
ENTER=Continue ESC=Cancel F3=Exit
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
5. Select LSI MegaRAID SAS RAID Controller Driver complying with your
Windows ® OS version, and then press .
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
LSI MegaRAID SAS RAID Controller Driver (Windows 2003)
LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)
6. The Windows ® Setup loads the RAID card drivers from the RAID driver disk.
When next screen appears, press to continue installation.
7. Setup then proceeds with the OS installation. Follow screen instructions to
continue.