Asus P9D-C/4L - Manual (Page 95)

ASUS P9D-C Series 4-29
4.4.16 APM
Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
Allows you to set the state the system will go to after an AC power loss. Configuration
options: �Power Off� �Power On� �Last State�
Power On By PCI [Disabled]
You can use this option to enable or disable the Wake-on-LAN feature of the Intel ® LAN.
Configuration options: [Disabled] [Enabled]
Power On By PCIE [Disabled]
This allows you to enable or diasble the PCIE devices to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
This item allows you to enable or disable RTC to generate a wake event. When set to
�Enabled�, the items RTC Alarm Date (Days) and Hour/Minute/Second becomes user-
configurable where you can set values.
EUP Ready [Disabled]
This item allows you to switch off some power at S5 to get the system ready for EuP
requirement. Configuration options: [Enabled] [Disabled]
4.4.15 Runtime Error Logging Support
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Runtime Error Logging Support [Disabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Restore AC Power Loss [Last State]
Power On By PCI [Disabled]
Power On By PCIE [Disabled]
Power On By RTC [Disabled]
EuP Ready [Disabled]
Specify what state
to go to when power
is re-applied after
a power failure (G3
state).
Runtime Error Logging Support [Disabled]
Allows you to enable or disable the Runtime Error Logging Support. Configuration options:
�Disabled� �Enabled�
Enable/Disable
Runtime Error Logging
Support.