Asus PCH-DL - Manual (Page 94)

4-36 Chapter 4: BIOS Setup
Supervisor Password [Clear]
User Password [Clear]
These fields allow you to set passwords.
To set a password:
1. Highlight an item then press .
2. Type in a password using eight (8) alphanumeric characters, then
press .
3. When prompted, confirm the password by typing the exact characters
again, then press . The password field setting is changed to
[Set].
To clear the password:
1. Highlight the password field, and press twice. The following
message appears:
“PASSWORD DISABLED!!! Press any key to continue...”
2. Press any key to return to the menu.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
Forgot the password?
If you forget your password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you need
to erase the CMOS RAM, refer to section “2.6 Jumpers” for
instructions.
Password Check [Setup]
This field requires you to enter the password before entering the BIOS
setup or the system. Select [Setup] to require the password before
entering the BIOS Setup. Select [System] to require the password before
entering the system. Configuration options: [Setup] [System]