Asus PCH-DL - Manual (Page 78)

4-20 Chapter 4: BIOS Setup
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA [Auto]
SATA Mode IDE
Serial ATA Port0 Mode SATA0 master
Serial ATA Port1 Mode SATA1 master
SATA Configuration
Item Specific Help
[Disabled]: Disable
SATA Controller.
[Auto]: Auto-arrange
the BIOS.
[Combined Mode]: PATA
and SATA are combined.
Max. of 2 IDE drives
on each channel.
[Enhanced Mode]:
Enable both SATA and
PATA. Max. of 6 IDE
drives are supported.
[SATA Only]: SATA is
opeating in legacy
mode.
Select Menu
ECP Mode Use DMA [3]
Allows you to select the ECP mode. This item becomes configurable only
if the Parallel Port Mode is set to [ECP] or [ECP+EPP]. Configuration
options: [1] [3]
Game Port Address [201]
Allows you to select the game port address. Configuration options:
[Disabled] [201] [209]
Midi Port Address [330]
Allows you to select the MIDI port address. Configuration options:
[Disabled] [330] [300] [290]
Midi Port IRQ [10]
Allows you to select the MIDI port IRQ. Configuration options: [5] [10]
SATA Configuration
**On-Chip Serial ATA Setting
1. The items SATA Mode, Serial ATA Port0 Mode, and Serial ATA
Port1 Mode are configurable only when the On-Chip Serial ATA
item is not set to [Disabled].
2. Refer to the Parallel ATA and Serial ATA device configurations on
page 2-24 for more information when installing IDE devices.