Asus M3N78-CM - Manual (Page 80)

2-34 Chapter 2: BIOS setup
2.5.4 APM Configuration
APM Configuration
Restore on AC Power Loss [Power Off]
Power On By PCI Device [Disabled]
Power On By Ring [Disabled]
Power On By PS/2 KB/MS [Disabled]
Power On By RTC Alarm [Disabled]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss.
Configuration options: [Power On] [Power Off]
Power On By PCI Device [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through
a PCI/PCIE/Onboard LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Enabled]
Power On By Ring [Disabled]
Allows you to enable or disable RI to generate a wake event. Configuration
options: [Disabled] [Enabled]
Power On By PS/2 KB/MS [Disabled]
Allows you to enable or disable PS/2 Keyboard/Mouse to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
Options
Power On
Power Off