Asus VH203T User Manual
Page 16
3-2
Chapter 3: General Instruction
2. Image
You can adjust brightness, contrast, ASCR,
sharpness, saturation, position (VGA only),
and focus (VGA only) from this menu.
Brightness
•
: the adjusting range is from 0 to 100.
is a hotkey to
activate this function.
Contrast
•
: the adjusting range is from 0 to 100.
is a hotkey to
activate this function. (For those models without speakers)
ASCR
•
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
Sharpness
•
: the adjusting range is from 0 to 100.
Saturation
•
: the adjusting range is from 0 to 100.
Position
•
: adjusts the horizontal postition (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
Focus
•
: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
Phase adjusts the phase of the pixel clock signal. With a wrong phase
•
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
•
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
3. Color
Select the image color you like from this
function.
Color Temp.
•
: contains five color modes including Cool, Normal, Warm,
sRGB, and User mode.
Skin Tone
•
: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.