Asus VH203T - Manual (Page 12)

2-2 Chapter 2: Setup
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this LCD monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide
out the arm/base to detach it from the monitor (Figure 2).
VGA AUDIO-IN
Arm/base
Rubbers in the
screw holes
Two screws
Figure 1 Figure 2
1
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.