Asus AP1600R-E2(CS3) - Manual (Page 29)

2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
2.5 Expansion slot
The barebone server comes with a riser card bracket installed on the 64-bit
expansion slot. You need to remove the bracket if you wish to install a PCI-
X expansion card.
2.5.1 2.5.1 2.5.1 2.5.1 2.5.1 Installing a short expansion card Installing a short expansion card Installing a short expansion card Installing a short expansion card Installing a short expansion card
To install a short expansion card:
1. Use a Phillips (cross) screwdriver
to remove the screw that
secures the riser card to the
chassis.
3. Remove the screw that secures
the slot metal cover.
4. Install a short PCI-X card to the
bracket as shown, then secure
the card with a screw.
2. Firmly hold a riser card bracket,
then pull it up to detach it from
the PCI-X slot on the
motherboard.