Asus AP1600R-E2(CS3) - Manual (Page 27)

2 - 9 2 - 9 2 - 9 2 - 9 2 - 9 A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
2.4 Hot-swap hard disk drives
2. Firmly hold the tray lever and
pull the drive tray out of the
bay.
3. Take note of the drive tray
holes. Each side has three holes
to fit different types of hard disk
drives. Use two screws on each
side to secure the hard disk
drive.
4. Place a hard disk drive on the
tray, then secure it with four
screws.
To install a hot-swap HDD:
1. Release a drive tray by pushing
the spring lock to the right,
then pulling the tray lever
outward. The drive tray ejects
slightly after you pull out the
lever.