Asus V7-P8H61E - Manual (Page 78)

4-24 Chapter 4: BIOS setup
4.6.5 Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
• To select the boot device during system startup, press when ASUS Logo
appears.
• To access Windows OS in Safe Mode, do any of the following:
- Press when ASUS Logo appears.
- Press after POST.
4.6.6 Boot Override
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
4.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press to display the submenu.
4.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press , a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press to
confirm your choice.
For more details, refer to section 4.1.2 ASUS EZ Flash 2.
4.7.2 ASUS SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [Slot 1] [Slot 2]
EFI BIOS Utility - Advanced Mode
Main Advanced Monitor Boot
Tool
Be used to update BIOS
> ASUS EZ Flash 2 Utility
> ASUS SPD Information
Exit EFI BIOS Utility - Advanced Mode