Asus V9999 Series - Manual (Page 20)

12
2.2.4 Windows NT 4.0
1. Boot your Windows NT system and log on as Administrator.
2. Switch display properties to VGA mode (16 colors, 640 x 480 pixels),
then restart your computer.
3. After startup, right-click on the Windows NT desktop and click
Properties.
4. Select the Settings tab.
5. Select Change Display Type.
6. Select Adapter Type and click Change.
7. Click Have Disk.
8. Insert the support CD.
9. Assuming that your CD-ROM drive letter is D, type D:\NT40 or click
Browse to select the path of the display driver for Windows NT then
click OK.
10. Select the appropriate ASUS VGA Card model then click OK.
11. When prompted, confirm installation of display drivers to copy all the
necessary files.
12. When done, click Close to return to the Display Properties box then
click Apply.
13. The System Settings Change dialog box appears. Click Yes to reboot
computer.
Before installing the display driver in Windows NT 4.0, make sure that
you have installed Windows NT 4.0 Service Pack 3 or later to take
full advantage of the AGP features of your card.