Asus P3-PH4 - Manual (Page 38)

2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2.11 Installing the foot stands
You need to install the foot stands to place the system vertically on your
desktop.
To install the foot stands:
1. Lay the system on its side on a
flat, stable, and elevated surface,
then locate two screw holes on
the left side of the system.
2. Extend the left side of the system
at least 3 cm from the edge of
the surface to facilitate
installation.
3. Align the foot stand and chassis
screw holes.
4. Drive in a screw to secure the
footstand to the chassis.
5. Follow the same procedures when
installing the second foot stand.
The photo on the right shows the
system in a vertical desktop
placement.