Asus DSBF-DM/SAS - Manual (Page 170)

5-60 Chapter 5: RAID configuration
5.6.5 Viewing SAS topology
1. From the Adapter Properties screen, select SAS Topology.
Press to display device properties, or to display more keys.
2. Information about the volume and its member-disks are then displayed.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
Esc=Exit F1=Help
Alt+D=Device Properties Alt+N=More Keys
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
SAS Topology -- SAS1068
Device Identifier Device
SAS1068105:03:001 Info
﹂ Enclosure Direct Attach Devices Controller
﹂ Bay 0 RAID Physical Disk SAS
Bay 1 SEAGATE ST373454SS 0003 SAS
Bay 2 RAID Physical Disk SAS
Bay 3 RAID Physical Disk SAS
﹂ IS VOL LSILOGICLogical Volume 3000