Asus DSBF-DM/SAS - Manual (Page 118)

5-8 Chapter 5: RAID configuration
6. Select RAID from the Logical Drive menu, then press .
7. Select the RAID level from the menu, then press .
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a RAID 1 set, select DWC from the Logical Drive menu, then
press .
When creating a RAID 0 set, proceed to step 10.
9. Select On to enable the Disk Write Cache setting, then press .
Enabling DWC can improve the performance, but with the risk of data loss.