Asus BP5265 - Manual (Page 73)

ASUS BP5265/AS-D770 3-39
3.9 Intel ® ME configuration
This function allows you to configure the Intel ® Management Engine (ME) settings.
Ensure that the ME function is enabled before configuring the settings. To
enable the ME function, refer to pages 4-24 and 4-24 for details.
To launch the Intel ® ME Setup
The following screen appears after the Power-On-Self-Test (POST). Press
+ P to launch the Intel ® ME Setup screen.
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
Intel(R) ME Firmware version 5.0.0.1098
Press to enter Intel(R) ME Setup.
3.9.1 Change Intel ® ME password
You are required to change the password when entering the setup for the first time.
By default , the password is admin.
To change the password:
1. Key in admin in the Intel(R) ME Password area, then press .
2. Key in a new password in the Intel(R) ME New Password area and press
.
3. Key in the password again in the Verify Password area and press .
A valid password must include uppercase and lowercase letters, special
characters (such as ~,%,*,#), and numbers.
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
Intel(R) ME Configuration
Change Intel(R) ME Password
Exit
[ MAIN MENU ]
[ESC]=Exit [Enter]=Access
Intel(R) ME Password