beautypg.com

Asus M2NPV-VM User Manual

Page 86

background image

2-36

Chapter 2: BIOS setup

Typematic Rate (Chars/Sec) [6]

Allows you to select the rate at which a character repeats when you hold a

key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]

Typematic Delay (Msec) [250]

Allows you to set the delay before keystrokes begin to repeat. Configuration

options: [250] [500] [750] [1000]

OS Select for DRAM > 64MB [Non-OS2]

Set this item to OS2 only when you are running on an OS/2 operating system with

an installed RAM of greater than 64 KB.

Configuration options: [Non-OS2] [OS2]

Case Open Warning [Enabled]

Enables or disables the chassis open status feature. Setting to Enabled, clears

the chassis open status. Refer to section “1.10.2 Internal connectors” for setting

details. Configuration options: [Disabled] [Enabled]

Quick Boot [Enabled]

Allows you to enable or disable the system quick boot feature. When Enabled, the

system skips certain tests while booting.

Configuration options: [Disabled] [Enabled]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

Typematic Rate Setting [Disabled]

Allows you to set the keystroke rate. Enable this item to configure the Typematic

Rate (Chars/Sec) and the Typematic Delay (Msec).

Configuration options: [Disabled] [Enabled]

Boot Up Floppy Seek [Disabled]

Enables or disables the chassis open status feature. Setting to Enabled, clears the

chassis open status. Configuration options: [Disabled] [Enabled]

The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become

user-configurable only when the item Typematic Rate Setting is enabled.