Asus M2NPV-VM - Manual (Page 38)

1-26 Chapter 1: Product introduction
3.. Keyboard.power.(3-pin.KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires an
ATX power supply that can supply at least 500 mA on the +5VSB lead, and a
corresponding setting in the BIOS.
M2NPV-VM
®
M2NPV-VM.Keyboard.power.setting
KBPWR
1
2 2
3
+5V
(Default)
+5VSB