Asus RS100-E6/PI2 - Manual (Page 43)

3-3 ASUS RS100-E6/PI2
3.3 Attaching the rails to the rack
To attach the rack rails:
1. Attach the inner rail to the correspoding side of the chassis and secure with
three inner rail screws. Make sure the rail is oriented as shown.
2. Locate the four screw holes on
each front-side of the chassis.
Select one side for installation.
3. Get one rack ear and match the
four screw holes to the screw holes
on the chassis. Orient the rack ear
as shown.
4. Secure the rack ear to the chassis
with four screws.
5. Repeat steps 2 - 4 to attach the
other rack ear.