Asus RS100-E6/PI2 User Manual

Page 32

Chapter 2: Hardware setup

2-14

3. Insert the hard disk drive into the

HDD bracket and secure it with four

screws.

5. Place the HDD bracket with the

hard disk drive installed into the

HDD tray 2, matching the four

screw holes. Then, secure the HDD

bracket with four screws.

4. Connect the SATA signal cable and

a power plug from the power supply

to the hard disk drive.

L-type SATA

connector

Use the L-type SATA connector

to connect to the hard disk drive.

6. Refer to section 2.7.2 Optical disk drive (ODD) to reinstall the ODD.

Power plug

SATA signal cable