Asus H61M-F - Manual (Page 36)

H61M-F
PIN 1
USB+5V USB_P5- USB_P5+ GND NC
USB+5V USB_P6- USB_P6+
GND
USB56
H61M-F USB2.0 connector
5. USB connector (10-1 pin USB56)
This connector is for USB 2.0 ports. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This
USB connector complies with USB 2.0 specification that supports up to 480 Mbps
connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
6. USB 3.0 connector (20-1 pin USB3_E12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5.0Gb/s, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
H61M-F
H61M-F USB3.0 Front panel connector
USB3_E12
USB3+5V IntA_P1_SSRX- IntA_P1_SSRX+ IntA_P1_SSTX- GND IntA_P1_SSTX+ GND IntA_P1_D- IntA_P1_D+ GND
PIN 1
USB3+5V
IntA_P2_SSRX- IntA_P2_SSRX+
GND
IntA_P2_SSTX- IntA_P2_SSTX+
GND
IntA_P2_D- IntA_P2_D+
Chapter 1: Product introduction 1-24