Asus H61M-F - Manual (Page 30)

2. PS2 and USB device wake-up (PS2_USBPW1-4)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
3. USB device wake-up (3-pin USBPW_FRONT)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
• The USB device wake-up feature requires a power supply that can provide 500mA on
the +5VSB lead for each USB port; otherwise, the system would not power up.
• The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
H61M-F
H61M-F Keyboard Power Setting
PS2_USBPW1-4
2
1 2
3
+5V
(Default)
+5VSB
H61M-F
H61M-F USB Device Wake Up
2 1 2 3
+5V
(Default)
+5VSB
USBPW_FRONT
Chapter 1: Product introduction 1-18