Asus T2-R User Manual

Page 63

ASUS Terminator 2 barebone system

Status - Ping tab
The

Ping tab allows you to verify the

connection of the host computer with
another computer in the network. To
ping a connection:

Type the IP address of the
connection you want to verify in
the

IP Address field.

Configure the ping session by
assigning the size and count of
packet to send, and the time
limit for a ping session to continue (in milliseconds).

Click the

Ping button.

During the ping session, the

Ping

button toggles into a

Stop button.

Click

Stop anytime to cancel the

ping session.

The session field displays
information on the verified
connection including the roundtrip
time (minimum, maximum, and
average) packets sent, received, and
lost after a ping session.

Click the

Clear button to clear the

ping session field.

Config - Basic tab
The

Basic tab provides general

information on network types and
other configurations.

Network Type. Select the type of
network that you wish to use. Select
Infrastructure

mode to establish a

connection with an access point
(AP). In this mode, your system can
access wireless LAN and wired LAN
(Ethernet) via the AP. Select the Ad
Hoc

mode to communicate directly

with other wireless clients within the adapter operating range.