Asus Pundit P2-PE2 - Manual (Page 26)

2 - 1 0 2 - 1 0 2 - 1 0 2 - 1 0 2 - 1 0 C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2.7 Replacing the top cover
Replace the top cover after installing the components.
To replace the top cover:
1. Position the front edge of
the top cover at least two
inches from the front panel
cover.
2. Fit the top cover hooks with
the chassis side tabs and the
front panel cover tabs.
3. Lower the rear edge of the
top cover as shown.
4. Push the top cover slightly
toward the front panel until
it fits in place.
5. Secure the top cover with
two screws that you
removed earlier.
H o o k s H o o k s H o o k s H o o k s H o o k s
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
5 5 5 5 5
5 5 5 5 5
4 4 4 4 4