Asus BP6335 - Manual (Page 45)

Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB .0 and USB .0 ports from the BIOS
Setup.
To.disable.or.enable.the.front.and.rear.USB.2.0.and.3.0.ports:
1.
Press to enter the BIOS Setup at startup.
. From the BIOS Setup screen, click Advanced > USB Configuration.
. Select the USB port that you want to enable or enable.
4. Press to enable or disable the selected USB port.
5. Click Exit and select Save.Changes.&.Reset to save the changes made.
Refer to Chapter 1 for the locations of the USB ports.
EN
GL
IS
H
EN
GL
IS
H
ASUS BM665(MD560), BM685, and BP65(SD560) 4
EN
GL
IS
H
EN
GL
IS
H