beautypg.com

Panel detail – Asus M3N78-VM User Manual

Page 9

background image

User Guide
VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003

9

Panel Detail

Adeck consists of two parts; A top and bottom panel. In the simple mode, only the top panel will be fully
shown. In the full mode, both the top and bottom panel will be fully expanded.

Top Panel

The top panel consists of several parts as shown in Figure 3.

Volume control:

This is the global volume control. The global volume is controlled using a slider. Scrolling

the slider to the left decreases the volume. Scrolling the slider to the right increases the volume.

Mute button:

This is the global mute control. When the mute button is activated, all speakers connected

to the system will be silenced.

Channels Display:

On the right of the peak meter, there is a display showing the number of audio

channels that is being used in the system. The number of channels can be changed in the speaker
configuration panel.

Peak Meter:

The volume peak meter is located to the left of the channel display. The number of peak

meters changes according to the number of channels used in the system.

S/PDIF Output Status:

The S/PDIF output status is located to the right of the Channel Display. If “Digital

PCM” is shown, that indicates the audio system will allow a PCM music stream output from the S/PDIF
output jack.

Bass Management Indicator:

The Bass Management Indicator is located below the Channel Display. If it

is enabled, “BM” will be visible. Notice that the “Bass Management” and “Equalizer” functions can not be
enabled at the same time.

Equalizer Indicator:

The Equalizer Indicator is located to the right of the Bass Management Indicator. If

it is enabled, “EQ” will be visible. As mentioned earlier, the Equalizer and Bass Management functions can
not be enabled at the same time.

Configuration Panels:

On the bottom of the top panel, there is a row of buttons. When any of the buttons

are activated (except the "Power" button), the bottom panel expands to show the selected panel.

Power Button:

When the Power button is activated, Adeck will hide itself in the system tray.

Volume Control

Mute

S/PDIF Output Status

Speaker Peak Meter

Open Middle Panel

Equalizer

Bass Management

Channel Number

Power

Figure 3 - Top Panel