Asus M3N78-VM - Manual (Page 11)

User Guide
VT1708A VIA HD Audio Adeck For Windows 2000, Windows XP & Server 2003
11
Configuration Panels
Speaker Configuration Panel
As Figure 4 shows, the Speaker Configuration Panel is divided into two parts. On the left side, the user
can select the number of audio channels. There are up to 8 channels available. Once a channel
configuration is selected the right side of the panel will change accordingly.
On the right side of Speaker Configuration Panel, the user can adjust the volume level for each speaker
separately. Speaker positions can also be changed. To test a speaker, single-click on the speaker to hear
the test audio clip. A Test button is also provided through which a user can test all the speakers
accordingly.
Below side of the speaker configuration on the right side, there is a check box for Center/LFE Swapping.
This function is used to swap the center speaker and LFE speaker audio streams.
Speaker Test Speaker Volume
Test All Speakers Center/LFE Swap Select Channels
Figure 4 - Speaker Configuration Panel
If the “Independent Headphone” feature has been enabled, the maximum number of channels will be six
as shown in Figure 5. To control the headphone volume, click on the headphone icon at the bottom-right
corner.
Figure 5 – Speaker Configuration Panel with Independent Headphone Enabled