Asus Vintage PE1 - Manual (Page 22)

2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8 C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2.7 Installing an optical drive
The optical drive is an optional item in this desktop system. Refer to the
instructions in this section if you acquired a model without an optical drive.
Follow these steps to install an optical drive.
1. Place the chassis upright.
2. Insert the optical drive into
the upper 5.25-inch drive bay.
S c r e w h o l e s S c r e w h o l e s S c r e w h o l e s S c r e w h o l e s S c r e w h o l e s
3. Carefully push the optical drive
into the bay until its screw
holes align with the holes on
the bay as shown.
4. Secure the optical drive with
two screws on both sides of
the bay.
S c r e w s S c r e w s S c r e w s S c r e w s S c r e w s