Asus R600 - Manual (Page 79)

Language Settings
Lets you select the language for text and voice travel messages and driving
directions.
GPS Settings
Destinator uses the GPS receiver to pinpoint your location. GPS signals
are automatically acquired and your vehicle’s location and position are
constantly updated unless you are working in the Free Browse Map mode
or you tap the GPS Off button. The GPS receiver may take a few minutes
to find its initial location. For best results, ensure that the GPS receiver has
a clear view of the sky.
The following GPS information is displayed:
• Longitude - The angular distance east or west on the earth’s surface.
• Latitude - The location of a place north or south of the earth’s surface.
• Speed - The rate of movement, as expressed by kilometres or miles per hour.
• Altitude - The height above sea level.
The GPS On and GPS Off buttons let you connect or disconnect from the GPS receiver. If you
are working in Free Browse Map mode, Destinator automatically disconnects from the GPS
receiver.
The Set TMC button lets you turn the TMC connection on and off.