2 cpu power management configuration, Cpu power management configuration -13, Dcu streamer prefetcher [enabled – Asus Z9PE-D16 User Manual
Page 69: Dcu ip prefetcher [enabled, Intel virtualization technology [enabled, Power technology [custom, Eist [enabled, Turbo mode [enabled, P-state coordination [hw_all, Configuration options: [disabled] [enabled
ASUS Z9PE-D16
4-13
DCU Streamer Prefetcher [Enabled]
This Item allows you to enabled/disabled L1 data prefetcher.
Configuration options: [Disabled] [Enabled]
DCU IP Prefetcher [Enabled]
This Item allows you to enabled/disabled L1 data prefetcher.
Configuration options: [Disabled] [Enabled]
Intel Virtualization Technology [Enabled]
When enabled this item, a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Configuration options: [Disabled] [Enabled]
This item allows you to
enabled power management
features.
CPU Power Management Confguration
Power Technology
[Custom]
EIST
[Enabled]
Turbo Mode
[Enabled]
P-STATE Coordination
[HW_ALL]
CPU C3 Report
[Disabled]
CPU C6 Report
[Enabled]
CPU C7 Report
[Disabled]
Package C State limit
[C6]
Factory long duratiion power limit 115 Watts
Long duation power limit
0
Factory long duratiion maintained 1000 ms
Long duation power limit
0
Recommended short duration power1 1.25 * Long Duration
Short duation power limit
0
4.4.2
CPU Power Management Configuration
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Power Technology [Custom]
This item allows you to enabled power management features.
Configuration options: [Disabled] [Energy Efficient] [Custom]
EIST [Enabled]
This item allows you to enabled/disabled Intel SpeedStep.
Configuration options: [Disabled] [Enabled]
Turbo Mode [Enabled]
Configuration options: [Disabled] [Enabled]
P-STATE Coordination [HW_ALL]
This item allows you to change P-STATE Coordination type.
Configuration options: [HW_ALL] [SW_ALL] [SW_ANY]